Turbobike Web Site www.Turborick.com
It would be no trouble for any fab guy to weld a new inlet tube to your intercooler in 1.5" size. At 11:33 AM 10/20/99 PDT, darin ginther wrote: >I dunno about the alloy, but I know a guy that's done some very >good TIG work for me. I've got all the plumbing mandrel bent >from a header shop - it's the darn silicon hose that's giving me >fits. > >Perhaps I'm going to have to do a little intercooler modification >so I can just use straight lengths.. just more time... I wanna >ride! > >-d > > > >>From: "John Williamson" <john.williamson5@virgin.net> >>To: "darin ginther" <d_ginther@hotmail.com> >>Subject: Re: [turbobike] I need some small turbo plumbings... DARN IT... >>Date: Wed, 20 Oct 1999 18:50:59 +0100 >> >>Sounds like you might have to find some alloy and a TIG welder.. >> >>----- Original Message ----- >>From: darin ginther <d_ginther@hotmail.com> >>To: <turbobike@natvideo.com> >>Sent: Wednesday, October 20, 1999 6:22 PM >>Subject: [turbobike] I need some small turbo plumbings... DARN IT... >> >> >> > Anyone know of a decent place that sells silicon turbo hose in >> > small diameter. What I need is 1.5 in (about 38.1 mm) - I've looked >> > through the HKS catalog most of it is 50mm+ - Perhaps the local >> > vendor didn't have a complete catalog? >> > >> > I actually ordered some straight length from Baker precision, but >> > after a month of no-hose delivery, I cancelled the order. >> > >> > In particular, the problem I'm having is that my intercooler is >> > 1 5/8 inlet/outlet and my bike's plumbing is 1.5 in. I need some >> > 90 deg bends in 1 5/8.. >> > >> > Vendor recommendations, please? >> > >> > ______________________________________________________ >> > Get Your Private, Free Email at http://www.hotmail.com >> > >> > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com > > bgoodwin@iquest.net FZR1000 turbo EFI (aka The Money Pit)